Skip to content

Download

Get the VoltraX app on your phone, and check what you need before you set up your strip.

Get VoltraX on your phone

Set up your strip and control it on your home Wi-Fi, even without internet.

Android
iPhone

Scan with your phone’s camera

Requirements

  • Android 7.0 or newer

    The VoltraX app runs on Android phones with Android 7.0 or newer. Setting up a strip is done in this app.

  • iOS 17 or newer

    The VoltraX app runs on iPhones with iOS 17 or newer, from the App Store. It sets up strips that already run VoltraX; moving a strip off its original firmware needs the Android app, once.

  • Any browser

    Sign in on this website to see your strips, and switch them once VoltraX Cloud is on for a strip. ☁

What you need

  • An MTTL-W01 strip

    The MTTL-W01 smart power strip (المشترك الكوري). One with the original LG firmware is moved to VoltraX by the app during setup.

  • 2.4 GHz home Wi-Fi

    The strip joins 2.4 GHz Wi-Fi with WPA2 or no password. A network that is only 5 GHz will not work.

  • A phone

    For a strip with its original firmware: an Android phone (7.0 or newer) with the VoltraX app, near the strip, for the first setup. After that, an iPhone (iOS 17 or newer) works too.

  • Internet, once

    To sign in and to add the strip the first time. After that your home Wi-Fi is enough.

  • A VoltraX account

    Continue with Google, or sign in with a phone account from VoltraX support.